17 thoughts on “Set Default Price list in MS CRM 2011 using Java Script”

1. Kathiravan November 22, 2011 at 10:55 am

   Hi i used the same coding in my online CRM 2011 but it is working the price list is created but i am having an error in the java script. kindly guide me. (I used the above coding without modification) thanks in advance.

   Reply ↓
   1. mahenderpal Post authorNovember 23, 2011 at 6:32 am

      Did you try to debug, what error you are getting there ??

      Reply ↓
2. TheeNerd December 31, 2011 at 5:31 pm

   Hi, thanks for the Tutotrial was really helpful
   please can you tell me where you set the default name for the Lookup Field?
   and can you please explain this line
   retrieveRecordsReq.readyState == 4 && retrieveRecordsReq.status == 200

   Reply ↓
   1. mahenderpal Post authorJanuary 4, 2012 at 5:57 am

      retrieveRecordsReq.readyState == 4 && retrieveRecordsReq.status == 200 is basically to check fi asyn call is completed or not.
      to set default lookup you need to write code onload of form, you can javascript to set default lookup field you can use below code to set lookup field
      var _lookup = new Object();
      _lookup.id = “<>”;
      _lookup.entityType = “entityName”;
      _lookup.name = “default name”;
      var _lookupValue = new Array();
      _lookupValue[0] = _lookup;
      Xrm.Page.getAttribute(<>).setValue(_lookupValue);

      Reply ↓
      1. TheeNerd January 4, 2012 at 9:55 am

         Thanks for your reply, actually i was able to write a script t set the Default value of a lookup Field when the value of another lookup field change, but actually is not working, the value of the lookup is set but dissapear immediatly after it has been set. Do you have an idea what that’s could be? when after setting the value of the lookup field i put a breakpoint in my code like alert(Ok) instead of alert(“Ok”) i will have an error message and after cliking ok the value of the lookup field will be set.
         Question why is the lookup field value set when i have a breapoint in my code and why isn’t it set when i don’t
         Thanks in advance for your replyThanks for your reply

         Reply ↓
         1. mahenderpal Post authorJanuary 4, 2012 at 9:58 am

            Could you paste your code, how you are doing it.

            Reply ↓
      2. theenerd January 6, 2012 at 11:18 am

         Hi please i have one question
         i change my code a bit but still not working, iVe call the methode Send after ready state and it tells me that retrieveRecordsReq.readyState isn’t equal 4, what does it mean?
         here is how i did:
         retrieveRecordsReq.onreadystatechange = function () {
         if (retrieveRecordsReq.readyState == 4) {
         var retrievedRecords = this.parent.JSON.parse(retrieveRecordsReq.responseText).d;
         var Result = retrievedRecords.results[0];
         var lookup = new Object();
         var lookupValue = new Array();
         SetLookup(“uomid”, Result.DefaultUoMId.Id, Result.DefaultUoMId.Name, “uom”);

         } else {
         alert(“EinFehler ist aufgetreten,Einheit wurde nicht gesetzt”);
         }
         };
         retrieveRecordsReq.send();

         Thanks in advance for your help

         Reply ↓
         1. mahenderpal Post authorJanuary 9, 2012 at 2:51 pm

            Sorry for late response, if state is not 4 it means, there is something wrong in your code, did you get any error???

            Reply ↓
            1. theenerd January 9, 2012 at 7:24 pm

               Hi
               actually there is nothing wrong with the code, i search a bit i noticed that after the Default value of the unit will set, another script will run after my and remove the value again, so i have delayed a bit before i called my function so that the crm script will run first and then my will run after, i ve not tried but i guess will work, keep you update
               Thanks
            2. theenerd January 12, 2012 at 4:07 pm

               Hi
               one question how do i filtered a Guid Feld in oData

               i’ve trieda lot of thing but with no succes

               i want to filter a productSet vi a specifi productId i’ve tried these but no working

               1. var filter = “/ProductSet?$select=DefaultUoMId&$filter=Id eq (guid’9B9F869E-531F-E111-BDF8-BC305BD0C8E3′)”;

               2. var filter = “/ProductSet?$select=DefaultUoMId&$filter=Id eq (guid’9B9F869E-531F-E111-BDF8-BC305BD0C8E3′)”;

               3. var filter = “/ProductSet?$select=DefaultUoMId&$filter=Id eq (guid’ ‘9B9F869E-531F-E111-BDF8-BC305BD0C8E3’ ‘)”;

               an idea?
               Thanks
            3. mahenderpal Post authorJanuary 13, 2012 at 3:07 pm

               you can try like below

               var filter = “/ProductSet(guid'” + Id + “‘)”, true);
            4. theenerd January 13, 2012 at 3:37 pm

               Hi Thanks for the message
               i’ve also tried ProductSet(guid'” + Id + “‘) but with no success. I m a bit lost. I can filter based on the Name but with the ID idon’t understand why is not working
3. theenerd January 13, 2012 at 4:35 pm

   Hi,
   i tried to debugged my code and surprisingly for me , the Product was filter but and exception occurs due to this “var Result = retrievedRecords.results[0];” please what do you to select the first result?
   Thanks

   Reply ↓
4. theenerd January 13, 2012 at 6:01 pm

   Hi,
   i am happy to anouced you that i was able to solve the problem and now i can set the default unit for a specific product, the Debbugger helped me alot, Now there are still some things i don’t understand, for instance
   1 retrieveRecordsReq.open(“GET”, oDataPath + filter, true); is not working the Status will be 1 but retrieveRecordsReq.open(“GET”, oDataPath + filter, false ); is working which role false or true have?
   2.In this specific case i din’t do retrievedRecords.Results[0] because when i lokked at the parameter “retrievedRecords” there was not results , in other scripts retrievedRecords.Results[0] works, in this i directly was usind the attribute of retrievedRecords

   Once again thanks a lot for your advices, was really helpful
   keep it up

   Reply ↓
5. Visy December 10, 2012 at 9:38 am

   Hi
   I have a smimilar Problem,

   We are trying to call WCF webservice. below is the code i am trying to write, I am getting Permission Denied Error.

   Please guide me on how to move forward.

   Note: While calliing a similar webservcie in Plugin we had created end points and passed the Credentials. any idea can we do something like that here in Jscript

   function GetEngineTransmissionDetails() {

   var xmlHttp = new ActiveXObject(“Microsoft.XMLHTTP”);
   var sUrl = ‘http://msfordcrmqa01.hpuscrmpoc.com/Ford2/SerializedVehicleServices.svc’; // location of the svc
   var sBody = ”
   + ”
   + ” // method Name
   + ‘389100049965899900’ // param 1

   + ”
   + ”
   + ”;
   xmlHttp.open(“POST”, sUrl, false); // end false defines the call as asychronous
   // meaning caller does not wait for the Request handler to finish
   xmlHttp.setRequestHeader(‘SOAPAction’, ‘http://tempuri.org/ISearchResultPopulator/GetEngineTransCodesDetails’);
   xmlHttp.setRequestHeader(‘Content-type’, ‘text/xml’);
   xmlHttp.send(sBody);
   alert(xmlHttp.responseText); // get the response from the WCF
   }

   Reply ↓
   1. mahenderpal Post authorDecember 10, 2012 at 9:57 am

      Did you check my post : http://mahenderpal.wordpress.com/2011/08/24/calling-external-webservice-from-ms-crm-2011-asynchronously-javascript/

      Reply ↓
6. Nicolai W Hjorth (@nicolaiwhjorth) July 10, 2013 at 7:45 pm

   Thank you for a good solution – I had been trying to write a plugin, to no avail – and your solution is so much nicer than the other I had been using (http://worldofdynamics.blogspot.dk/2011/06/how-to-set-default-price-list-on.html – hardcoded pricelevel ID). This way I can move between orgs without any worry.

   Reply ↓